-
Supported vs unsupported 3d prints
When a model has an overhang or bridge without being supported from below, you will more than likely need support. Not all overhangs need support, overhangs built on an angle of LESS than 45 degrees can usually print without support. When in doubt load your model into Cura and see if it will generate supports,…
-
Ultimaker S3 Cura Tutorial (unsupported)
Note: This tutorial is for unsupported prints, if your print need support, use the tutorial for supported prints. Read more about supported vs. unsupported print here. 1 Open Cura, this is what the default screen should look like. 2 Choose the printer you want to create a print file for using the drop-down menu. 3…
-
Ultimaker S3 Cura Tutorial (supported)
Note: This tutorial is for supported prints, if your print does not need support, use the tutorial for unsupported prints. Read more about supported vs. unsupported print here. 1 Open Cura, this is what the default screen should look like. 2 Choose the printer you want to create a print file for using the drop-down…
-
3D printers
3DPrinterOS File submission for 3D printing has migrated to 3DPrinterOS. Follow below to get started. Login via 3dprinteros.com Log in with your NYU credentials. Click on “My Account” to get to the login screen. Underneath the Orange “Sign in” button is a field where you can search for a school or university. Type ‘NYU’ or…